Showing 13–24 of 41 results

  • Power Lithium Polymer Batteries

    Power Lithium Polymer Batteries

     Power Battery

    This series of batteries are mainly suitable for air models such as drones/aerial cameras/helicopters/traversing planes, car models such as RC cars/rail cars, boat models such as RC boats/hovercrafts/speedboats/blimps, ejector toys and power tools.

    To:This series of power battery has high energy and does not come with protection plate, so it is strongly recommended to use a standard high quality special charger with constant current and constant voltage function for charging; in order to be safe, remember to charge under supervision and cut off the power supply immediately after full.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.5C

    Charging time: 0.1C*15hrs(standard)/0.5C*2.5hrs(fast)

    Standard charging method: 0.1C constant current (CC) charging to 4.2V/string, then 4.2V/string constant voltage (CV) charging to current less than 0.01C.

    Maximum charging current*: 0.5C/0.2C below 20°C

    Discharge cutoff voltage: 3.3V/string | 2.75V/string at normal magnification

    Minimum storage voltage: 3.7V/string, otherwise it should be recharged in a timely manner.

    *Voltage value multiplied by the number of cell strings when connected in series Current multiplied by the number of cell parallels when connected in parallel; operating current whichever is the smaller parameter.

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

  • Power Nickel-metal Hydride Batteries

    Power Nickel-metal Hydride Batteries

     Power Battery

    This series of products are suitable for models, toys, tools or electronic equipments that require high current discharge, such as electric car models, boat models, air models, catapult toys, mixers and so on.

     

    Electrical Characteristics:

    Charging current: standard ~0.1C/fast ~0.5C
    Charging time: 0.1C*12hrs(standard)/0.5C*2.5hrs(fast)

    Standard charging method: Constant current (CC) charging / 0.5C or more whisker-ΔV control

    Maximum charging current*: 1C/0.2c below 10°C

    Discharge cutoff voltage*: 0.9V/string | normal multiplier 1.0V/string

    Minimum storage voltage: 1.2V/string, otherwise it should be recharged in time.

    *Voltage value multiplied by the number of cell strings when connected in series/current multiplied by the number of cell parallels when connected in parallel; operating current whichever is the smaller parameter.

    *Specialized chargers must be used! Use of non-standard chargers may not achieve the effect of use or even damage the battery.

     

    Temperature Characterization:
    Charging: 0~45℃ Discharging: -10~55℃ Storage: -20~35℃
    Relative humidity: 45~85%

  • Cylindrical Lithium-ion Battery Packs

    Cylindrical Lithium-ion Battery Packs

     Battery Pack
    Power Module

    This series of products with protection board, with the function of preventing overcharging, over-discharging, over-current, short-circuit and so on. It is mainly applied to monitor, alarm, heater, banknote counter, mobile backup power, amplifier, navigator (GPS), LED lights, toys and other electronic devices.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V/string, then 4.2V/string constant voltage (CV) charging to current less than 0.01C.
    Maximum charging current: 0.5C / 0.2C below 20°C
    Continuous discharge current: 0.5C / 0.1C below 10°C
    Maximum discharge current: 1C / 0.2C below 10°C
    Discharge cutoff voltage: 2.75V/string
    Minimum storage voltage: 3.7V/string, otherwise it should be recharged in a timely manner.

    *Voltage value multiplied by the number of cell strings when connected in series/current multiplied by the number of cell parallels when connected in parallel; operating current whichever is the smaller parameter.

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

  • High Current Fast Charging Series

    High Current Fast Charging Series

     Lithium Polymer Battery

    This series of products can be rapidly charged with high current at medium/high rates.

    Most of the batteries in this series are compatible with the corresponding models of ordinary digital type batteries, which are mainly suitable for Bluetooth/wireless devices, recording/dot-reading pens, Walkman/speakers/MP3/amplifiers, rechargeable lighters, mobile back-up power supply, medical devices, smart home/Internet of Things (IoT), navigators (GPS), cell phones, toys, and other kinds of electronic products or devices.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V, and then 4.2V constant voltage (CV) charging to current less than 0.01C.
    Discharge cut-off voltage: 2.75V
    Minimum storage voltage: 3.7V, otherwise it should be recharged in time

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

  • Little Frog Series

    Little Frog Series

     E-Vehicle Batteries

    This series of lithium batteries for electric bicycles are assembled with high-performance 18650 lithium batteries from big brand factories, with sufficient capacity, stable performance and long-lasting range. The shell is made of ABS engineering plastic, which is fireproof, aging-resistant and corrosion-resistant. The base is made of high hardness metal, with controller box, durable, hidden, beautiful, flexible installation, can be hung in the body down tube, seat tube, front tube and other positions, and the car as a whole into one.

    At present, there are several voltages of 24V/36V/48V/51V, which are mainly applicable to various electric bicycles/assisted vehicles/folding vehicles/converted vehicles/scooters, electric wheelchairs and other small vehicles or amusement equipment such as electric boats, and can also be used as portable outdoor power supply or mobile backup power supply.

  • With NTC Protection ~ 3-Wire Series

    With NTC Protection ~ 3-Wire Series

     Lithium Polymer Battery

    The protection board of this series of products with NTC resistors can effectively protect the battery or equipment from being damaged by excessive switching surges.

    The scope of application is the same as that of the corresponding series of products.

     

    Electrical Characteristics: 
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V, and then 4.2V constant voltage (CV) charging to current less than 0.01C.
    Discharge cut-off voltage: 2.75V
    Minimum storage voltage: 3.7V, otherwise it should be recharged in time

     

    Temperature Characterization:
    Charging: 10~45°C Storage: 0~25°C
    Relative humidity: 45~85%

  • Square Lithium-ion Battery Packs

    Square Lithium-ion Battery Packs

     Battery Pack
    Power Module

    This series of products with protection board, with the function of preventing overcharging, over-discharging, over-current, short-circuit and so on. It is mainly applied to monitor, alarm, heater, banknote counter, mobile backup power, amplifier, navigator (GPS), LED lights, toys and other electronic devices.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V/string, then 4.2V/string constant voltage (CV) charging to current less than 0.01C.
    Maximum charging current: 0.5C / 0.2C below 20°C
    Continuous discharge current: 0.5C / 0.1C below 10°C
    Maximum discharge current: 1C / 0.2C below 10°C
    Discharge cutoff voltage: 2.75V/string
    Minimum storage voltage: 3.7V/string, otherwise it should be recharged in a timely manner.

    *Voltage value multiplied by the number of cell strings when connected in series/current multiplied by the number of cell parallels when connected in parallel; operating current whichever is the smaller parameter.

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%

  • E-Vehicle Lithium Battery Charger

    E-Vehicle Lithium Battery Charger

     Charger
    • Three-stage charging:Pre-charge-constant current-constant voltage, three-stage intelligent control
    • Safe and secure:IC intelligent control, charging status by the two-color LED display, full turn light self-stopping
    • Quadruple protection:Short-circuit, reverse connection, over-current, over-voltage protection, automatic stop charging in case of error.
    • Multi-chemical systems:Support Saintyear/LiMn/LiCoO2/LiFe/etc lithium batteries

    Suitable for all kinds of electric bicycle/scooter/assisted vehicle 7/10/13/14 series lithium battery pack, 8/16 series lithium iron battery pack.

  • Battery Pack/Built-in Module

    Battery Pack/Built-in Module

     E-Vehicle Batteries

    This series of products are mainly applied to the personalized customization/assembly DIY of all kinds of transportation batteries.The products are assembled with high-performance 18650 lithium battery cells from big brand factories, with sufficient capacity, stable performance and long-lasting endurance. With protective plate and waterproof glue. There are 24V, 36V, 48V, 51V and other series, capacity from 5~100AH can be customized.

    It is mainly applicable to all kinds of electric bicycles/assisted folding car/converted car/scooter, twisting car, balance car, unicycle, electric wheelchair and other small environmental protection transportation or electric boats and other amusement equipment, and can also be used as a portable outdoor power supply or mobile back-up power supply.

  • LiFePO4 Battery Charger

    LiFePO4 Battery Charger

     Charger

    With MCU intelligent chip control, it can automatically turn the light and stop charging when fully charged.

    Suitable for polymer lithium iron batteries, cylindrical lithium iron batteries and many other types of 3.2V lithium iron batteries or 3.2V*N lithium iron battery packs.

  • Lithium Iron Phosphate Battery Pack

    Lithium Iron Phosphate Battery Pack

     Battery Pack
    Power Module

    This series of products are mainly applied to solar lawn garden lights, night fishing lights, mining lamps, strong lights, monitoring equipment, heaters, amplifiers, air model remote control (transmitter/receiver), children's car/boat/tank model toys, intelligent robots, VR equipment, portable water pumps/inflatable pumps/stirrers for small home appliances, sweepers, power tools, energy storage backup power, mobile backup power, and other electronic equipment.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 3.65V/string, then 3.65V/string constant voltage (CV) charging to current less than 0.01C.
    Maximum charging current: 1C / 0.2C below 10°C
    Continuous discharge current: 1C/0.5C below 10°C
    Maximum discharge current: 2C/0.5C below 10°C
    Discharge cutoff voltage: 2.0V/string
    Minimum storage voltage: 3.2V/string, otherwise it should be recharged in time.

    *Voltage value multiplied by the number of cell strings when connected in series/current multiplied by the number of cell parallels when connected in parallel; operating current whichever is the smaller parameter.

    *Specialized chargers must be used! Use of non-standard chargers may not achieve the effect of use or even damage the battery.

     

    Temperature Characterization:
    Charging: 0~45℃ Discharging: -20~60℃ Storage: -10~45℃
    Relative humidity: 45~85%

  • Lithium Polymer Battery Packs

    Lithium Polymer Battery Packs

     Battery Pack
    Power Module

    This series of products with protection board, with the function of preventing overcharging, overdischarging, overcurrent, short circuit and so on.Mainly suitable for amplification, mobile video,indoorSquare dance speakers/sound field (in a room or theater),Camcorders, Walkie Talkies, Navigation/Locator (GPS), Smoke Alarms, Banknote Detectors, Backup Power Supplies, Medical Devices, Smart Home/Internet of Things, LED Lighting Fixtures/Strong Lights/Night Fishing Lights,Survey and Mapping InstrumentsThe product is a variety of electronic products or devices, such as cell phones, toys, and so on.

     

    Electrical Characteristics:
    Charging current: standard ~0.1C/fast ~0.2C
    Charging time: 0.1C*15hrs(standard)/0.2C*7.5hrs(fast)
    Standard charging method: 0.1C constant current (CC) charging to 4.2V/string, then 4.2V/string constant voltage (CV) charging to current less than 0.01C.
    Maximum charging current: 0.5C | 0.2C below 20°C
    Continuous discharge current: 0.5C | 0.1C below 10℃.
    Maximum discharge current: 1C | 0.2C below 10℃.
    Discharge cutoff voltage: 2.75V/string
    Minimum storage voltage: 3.7V/string, otherwise it should be recharged in a timely manner.

     

    Temperature Characterization:
    Charge: 10~45℃ Discharge: -10~55℃ Storage: 0~25℃
    Relative humidity: 45~85%